Kuulee Zbor Controler de Bord cu Argintărie Firmware Tuși Lite Mini Periat de Control al Zborului cu 55mm PH-JST 2.0 Cablu de Alimentare

37.26lei 93.11lei

CAIETUL de sarcini

Modul receptor: XN297LBW

ESC: Toate FET sunt apreciate la maxim 12A.

Support6x15mm/7x20mm/820mm/8.5x20mm etc motors.

Dimensiuni: 26mm x 26mm

Pe deplin compatibil cu Inductrix quadframe și de montaj model

Firmware: Argintărie

Receptor protocol: protocol Bayang

Cablu de alimentare: 50mm.Cu JST-PH 2.0 conector

Greutate: 2.7 g

Compatibil transmițător radio :BETAFPV TX01 transmițător radio

Transmițător Radio de jucarie teleghidat likeJJRC H67, E011 etc, asta e, folosind bayang protocol

Jumper tag T8SG transmițător radio

MTX9D modul multiprotocol (costum pentru Frsky Tanaris QX7 X9D X9D plus X12S, Flysky TH9X, Turnigy 9XR/9XR PRO )

MTXI6 modul multiprotocol (costum pentru Flysky i6 , i6S , I6X , I10)

Alte 4in1 multiprotocol module care sprijină Bayang protocol

Pachetul include:

tuși Lite periat de zbor controler *1

55mm PH-JST 2.0 cablu de alimentare *1

M1.2x4mm șuruburi (se Potrivesc pentru stoc Inductrix cadru) *1

Anti-vibrații ruber amortizoare *4

2P*1.25 MM soclu *4


  • Origine: NC(de Origine)
  • Nume De Brand: Kuulee
  • Tip: Bajas
  • Material: Metal
  • Caracteristici: Control De La Distanță

Etichete: piciorul mouse-ul, instrument de zbor simulator, baja rovan, baja 5b roata, controlor de zbor, ph, industriale ph controller, pensulă machiaj, fibra de carbon se taie, hpi baja.

Www Rinaaldy123
2020-11-01
5/5
seller gave me a tracking number that showed the package was shipped before I bought. I will not be buying from this seller again.
Saidekaracalli
2020-10-19
5/5
all ok
Sofiabeetusita
2020-10-21
5/5
good
Visheslavtavezi
2021-02-01
5/5
Arrived one day after the expected date; which is excellent given the current situation. I wanted a low cost FC board to replace a stock board in a cheap E010 drone clone so I can fly it with a known protocol (Bayang) using a multi-protocol equipped Tx. I had to find a basic manual on the web and identify the motor connection polarities but could then transfer the FCs over with no problem other the fact that this one is a bit big for my cheap drone frame and canopy. (Note though that it should be a correct fit for a proper racing drone frame and set-up). The new board works pretty much as expected. I still need to rebind each time I use it, which isn't really a problem and is probably because I haven't saved the bind configuration correctly. I have noticed it doesn't seem to give much warning of low battery but otherwise it seems to work well and is excellent value for money.

Ați putea dori, de asemenea